How to DIY Super Cheap, Super Beautiful Swimming Pool

On hot days, the need to cool off by going to water parks or public swimming pools is a method chosen by many people, leading to an overload situation that increases the need to own a private pool at home.

So how to build a swimming pool at home? How much does the family swimming pool cost? and what to look for before and after swimming pool construction as well as how to build a pool deck? All will be in the article below.

Obtain necessary building permits with local authorities

Any addition or removal of items in the home that are different from the original design requires a building permit registration with your local authority.

In addition to licensing you to build a swimming pool, a house building permit states the specific requirements and specifications of the pool.

Do not forget to check the instructions of loved ones before starting the installation to avoid wasting too much unnecessary time.

Choose a suitable location for the pool

The location of the swimming pool is very important because this is a large item, it will directly affect the daily activities of the whole family, in addition to the problems of feng shui or earthen works such as power lines or water pipes leading into the home.

In addition, in some locations, the installation of a swimming pool may cause you to add or remove outdoor structures such as trees or fences, and this will increase the project cost. So please locate carefully, if in doubt, consult the architect who used to build your home.

Define the basic design of the pool

You want the pool to look like. Do you like circular, square or rectangular pools? How deep is that? How many entrances and exits does the swimming pool have? These are important details that you must discuss with the contractor before starting the project

The pool area should be 1/3 - 1/5 of the housing area, the minimum is 12-15m2 and should be less than 100m2. The standard sizes of current family swimming pools are: 10-20m long, 3-10m wide, 0.5-2m deep.

According to experts, the pool area for underground garden villas should be 32-64m2, for townhouses should be 24-32m2 and with rooftop swimming pools should be less than 24m2.

Expensive digging to install swimming pools

After choosing the right swimming pool material in how to build a pool deck, the next step is to measure, mark the area to be the pool, then start digging.

Please pay attention to the careful measurement as the excavation work is the most important part, as the other components are installed correctly or not will depend on this step.

A little caveat before digging is to make sure you have full permits and that the ground you dig is not on water pipes or power lines to avoid future trouble.

Flatten the ground in the area where the lake is located

After digging the hole is complete in how to build a pool deck, the next step is to level the ground that will become the pool bottom. You need to cover the bottom surface with a thick layer of gravel, then rake and compact until the ground is completely flat.

There are two ways to level the ground at the bottom of a lake. One is to make a flat bottom pool, otherwise you can make a steep pool like a plus pool.

Support for wall or pool wall

After you are done with the pool foundation, you can use metal or wood to install it around the perimeter of the pool wall, which will make the pool more secure.

Note the alignment to the tank flat, not ordered to one side.

Hint: hire a party specializing in steel structures to shape the lake wall if you are not specialized in this, it will save much more time and effort.

Installing pumping, draining and water filtration systems for swimming pools in how to build a pool deck

The systems to be installed are exhaust pipes, surface water collectors, two- and three-way valves, main pumps, which are used to supply water into the lake, discharge it, and circulate the water in the lake.

Care should be taken in installing these pipes as if installed incorrectly you could mess up your pool.

Install power lines for swimming pools

It is necessary to lead electricity to the filtration system and the pump system. And this is a dangerous job so if you are not fluent in electricity, hire a skilled technician.

The safety of swimming pools is a big issue to consider. A faulty power line increases the risk of electric shock for swimmers

Complete the family pool

For those who choose concrete materials for swimming pools, use a mixer to pour concrete into the steel formwork installed around the pit, then level and smooth the concrete surface while the concrete is still wet.

Checks should be made to ensure that the watch bottom slope is even from end to end.

Concrete lake walls are usually finished with slag bricks or sprayed concrete. You should consider the benefits of each option.

For fiberglass or composite, only cranes or similar equipment are required for installation. It is then possible to pour cement or concrete around the pool.

For pool vinyls, you can only lay out the vinyl backing after the backing has been made. Just spread out a vinyl tarpaulin and stretch it out to cover the entire inside of the pool. Then attach the canvas to the outer edge of the tank with the built-in clamps and insert the vacuum nozzle to draw air between the liner and the pool wall.

Previous Post Next Post